Sangam Vihar, Delhi
GST No. 07CICPS3226G1ZC
Approx. Rs 90,000 / UnitGet Latest Price
Product Details:Brand | MAS |
Material | ABS |
Energy | 10-2000mJ |
Length | 1064nm,532nm,1320nm |
Color | White |
Screen | LCD |
Screen Type | 270 Degree Rotatable |
Input Power | 500 W |
Technique | YAG Laser |
Voltage | 110V-240V |
Pulse Width | Below 10ns |
Repetition Rate | 1-10Hz |
Cooling Condition | Air and Water cooling system |
Approx. Rs 1.8 Lakh / UnitGet Latest Price
Product Details:Laser Wavelength | 640nm, 530nm, 480nm |
Brand | MAS |
Usage/Application | Parlour, Personal, Hospitals, etc |
Skin Type | Normal Skin |
Color | White |
Voltage | 230 V |
Frequency | 50 Hz |
Application
1.E-light(IPL+RF):
2. RF (Mono-polar):
3. ND: YAG laser:
Approx. Rs 4.5 Lakh / PieceGet Latest Price
Product Details:Laser Type | Diode |
Screen | 6 Inch |
Lamp Type | Xenon Flash |
Spot Size | 12x50 mm |
Cooling Type | Water |
Energy Output | 2000 mJ |
Energy Density | 120 sq. cm |
Pulse Number | 5 |
Approx. Rs 1.5 Lakh / UnitGet Latest Price
Product Details:Screen | 5 inch |
Technique | Optimal Pulse Technology |
Brand | MAS |
Color | White, Blue |
Spot Size | 15x50 mm |
Pulse Width | 1-8 ms |
Output Power | 1700W |
Approx. Rs 90,000 / UnitGet Latest Price
Product Details:High Frequency Pulse | 1-6 Hz |
Power Output | 1500 VA |
Wavelength | 1064, 532 nm |
Output Energy | 160, 350, 600 mJ |
Pulse Duration | 8-10 ns |
Approx. Rs 4 Lakh / UnitGet Latest Price
Product Details:Brand | MAS |
Voltage | 220 V |
Frequency | 50 Hz |
Spot Size | 15x50mm |
Screen | 8.4 inch |
Output Power | 1700W |
Pulse Width | 1-8 ms |
Country of Origin | Made in India |
Approx. Rs 3 Lakh / UnitGet Latest Price
Product Details:Energy Density | 1-40J/cm2 adjustable |
Pulse Repetition Rate | 1-10Hz |
Country of Origin | Made in India |
Spot Size | 15x20mm |
Frequency | 50/60Hz |
Usage/Application | Hair Removal |
Laser Type | Intense pulsed light |
Wavelength | 640nm,530nm |
Voltage | 100-240VAC |
Pulse Duration | 1-15ms |
Approx. Rs 4.5 Lakh / UnitGet Latest Price
Product Details:Brand | MAS |
Wavelength | 808nm |
Laser Type | Diode Laser |
Light Conduction Ways | Directly Coupled Forced Cooling Sapphire Crystal Guide Light System |
RF Energy Density | 50 J/cm2 |
Pulse Width | 10 ns |
Continuous Work Time | 2-3 hours |
Marking Area | 15mm x 30mm |
Laser Bars | 10 bars |
Power | 600W |
Frequency | 10-20Hz |
Approx. Rs 4 Lakh / UnitGet Latest Price
Product Details:Brand | MAS |
Continuous Work Time | 2-3 hours |
Energy Density | 1 - 50 J/cm2 |
Screen | 6 inch |
Pulse Width | 10 ns |
Light Conduction Ways | Directly Coupled Forced Cooling Sapphire Crystal Guide Light System |
Power Supply | 220 V |
Approx. Rs 1.2 Lakh / UnitGet Latest Price
Product Details:Input Power | 700W |
Width Of Pulse | 1-100s |
Yag Bar Size | 6 |
Pulse Frequency | 1-10Hz |
Usage/Application | For Tattoo Removal |
Laser Type | Nd YAG laser |
Pulse Energy | 100-1700 MJ |
Spot Diameter | 1-5mm Continuous Adjustable |
Cooling System | Wind + Water + Semiconductor |
Approx. Rs 3.75 Lakh / UnitGet Latest Price
Product Details:Wavelength | 10.64 um |
Laser Type | CO2 Laser |
Spot Size | 0.12mm |
Usage/Application | Parlour, Personal, Hospitals, etc |
Power Output | 1-40W |
Spot Density | Up to 102400 dot |
Scan Size | Up to 20x20 mm |
Scan Shapes | Square; Rectangle; Circle |
Approx. Rs 4.5 Lakh / UnitGet Latest Price
Product Details:Pulse Width | 10 ns |
Laser Type | CO2 |
Laser Tube Type | Glass Tube |
Power Supply | 220 V |
Cooling Sapphire | Crystal Guide Light System |
Light Conduction Ways | Directly Coupled Forced |
Continuous Work Time | 2-3 hours |
Light Board Size | 15mm x 30mm |
Energy Density | 1-5 J/cm2 |
Approx. Rs 4.5 Lakh / UnitGet Latest Price
Product Details:Input voltage | 110-220 VAC |
Current | 10 A |
IPL Energy | 1-5 J/cm2 |
RF Energy | 1-20kHz |
Working Time Of RF | 100-2000 ms |
Pulse Width | 1-8 ms |
Spot Size | 12x30 mm |
Operation Screen | 8.0 inch |
Approx. Rs 5 Lakh / PieceGet Latest Price
Product Details:Usage/Application | Clinical Purpose |
Brand | MAS |
Fractional CO2 laser is a type of skin treatment used by dermatologists or physicians to reduce the appearance of acne scars, deep wrinkles, and other skin irregularities. It is a non-invasive procedure that uses laser, specially made of carbon dioxide, to remove the outer layers of damaged skin.
2. What Does Fractional CO2 Laser Treat?Fractional CO2 laser is commonly used to treat acne scars. However, it can also tend to a wide range of skin problems such as:
Age spots
Crow’s feet
Enlarged oil glands (especially around the nose)
Fine lines and wrinkles
Hyperpigmentation
Sagging skin
Sun damage
Uneven skin tone
Warts
The procedure is often done to the face, but the neck, hands, and arms are just a few of the areas that the laser could treat.
3. Who Should Get Fractional CO2 Laser?Fractional CO2 laser is ideal for people who like to minimize the appearance of acne scarring, fine lines, pigmentation, and other skin conditions listed above. Dermatologists also recommend undergoing the procedure if you suffer from a non-responsive skin after a bad facelift.
4. Who Should Avoid Fractional CO2 Laser?Unfortunately, the fractional CO2 laser is not for everyone. Individuals with extensive breakouts, open wounds, or any infections on the face are advised to stay away from this skin procedure. People who take oral isotretinoin should also avoid the procedure as it poses a risk for health and safety.
If you have chronic medical conditions (such as diabetes), you should also take extra caution and make it a point to consult a doctor or dermatologist first.
Having said all of these things, it’s vital that you schedule a consultation with a dermatologist in order for them to assess whether you are qualified for the procedure or not.
5. How Is The Fractional CO2 Laser Procedure Done?The fractional CO2 laser is often done by applying a local anesthetic cream to the problem area 30 to 45 minutes prior. The procedure itself lasts for only 15 to 20 minutes.
It uses short-pulsed light energy (known as ultra pulse) that is continuously blasted through a scanning pattern in order to remove thin, outer layers of damaged skin.
Once the dead skin cells are eliminated, the procedure activates the production of multiple microthermal zones that reaches deep into the skin. Through this, it can stimulate your body’s natural healing process and boost collagen production. This ultimately replaces the old, damaged cells with new, healthy skin.
6. What Do I Need To Do Before Fractional CO2 Laser?Before undergoing a fractional CO2 laser procedure, it’s recommended to follow these pre-treatment rules.
Don’t use products containing retinoids as it can affect the end results.
Avoid excessive sun exposure 2 weeks prior to the laser treatment.
Stop taking medications such as ibuprofen, aspirin, and even vitamin E as this can lead to prolonged clotting.
Consult your dermatologist to find out if you’re a good candidate for the fractional CO2 laser treatment.
Thanks to the fractional technology used during the procedure, healthy tissues underneath the skin can still be found just in between the microthermal zones where heat was applied. These healthy tissues are able to provide the cells and proteins required to quickly heal the skin.
As a result, patients only have to undergo shorter recovery periods—lasting for 5 to 7 days.
Explore More Products
© Mitakshi Aesthetics Solution. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited